Starseed Fusion delivers a reclined flying position for a relaxed paragliding feel. We have achieved this by raising the specially designed fuel tank to become the back panel; new swing arms, and properly balanced geometry of both the Starseed Fusion star frame and optimized harness.
Starseed Fusion is a study in sophisticated simplicity, offering the best possible balance of flight characteristics, feel, aerodynamics, safety, and design. The heart is the star frame, which acts as a anchor point throughout the design, eliminating twisting and stiffening the whole paramotor.
Many pilots believe all airframes have the same flight characteristics and feel but they couldn’t be more wrong! The airframe is the most important part of the flying experience. Starseed Fusion delivers the most integrated, relaxed, and dynamic flying experience ever.
Starseed Fusion is the state of being total and complete; it literally feels and acts like an integrated extension of your body. It is a part of you, both on the ground and in the air, and behaves totally differently to most, if not all, paramotor airframes on the market.
Starseed Fusion gives you an all-new level of direct control, with incredible efficiency. Based on years of extensive testing, we have landed what we believe is the perfect balance between the thrust line, the arm attachment points, the raiser attachments, and the reclined flying position.
Our all-new 8L fuel tank has a built-in tilt feature to deliver a comfortable reclined flying position. It is raised to become the back panel, thus providing free flow of air around the pilot and getting more thrust out of every engine on the market. A vented fuel cap to prevent fuel leakage is standard.
Starseed Fusion gives you an all-new level of direct control, with incredible efficiency. Based on years of extensive testing, we have landed what we believe is the perfect balance between the thrust line, the arm attachment points, the raiser attachments, and the reclined flying position.
According to polls, 80% of all pilots fly less than one hour per flight. But for those very long XC flights, an optional custom designed flexible fuel tank placed inside our front fuel container allows you carry up to 9.5L of extra fuel and pump fuel directly into the main fuel tank on your back.
Starseed Fusion is delivered with a 140 cm hoop and is the ultimate travellers and explorers’ machine, being lightweight and very compact. A 120 cm ultra compact version is in the works.
The S-shaped top strut provides a good separation from the hoop allowing an unobstructed view of your wing. You can easily tilt your head backwards, looking straight up even with your helmet on. No more take-offs without first thoroughly checking your wing!
The new MKII SuperLight paramotor harness is the most advanced and feature-packed paramotor harness available. It is also the only fully certified paramotor harness on the market, having passed both EN and LTF standards. A side-mounted reserve pocket is standard.
The Apco Paramotor leg cover Pod for the Apco SLT MKII harness can be opened both from top and bottom. During take-off and landing, it is stowed against the chest with a magnetic attachment. Once in the air, the pilot can easily step into the pod from the opening underneath.
Our Magnetic KickStand™ system ensures the paramotor sits firmly on the ground when not in use. When preparing for take-off, the Magnetic KickStand™ quickly slides away from your feet and reattaches to the rest of the frame in a locked position with two Neodymium magnets.
The sophisticated Snap-on™ net is made out of Dyneema and our very own rubber formula, is super easy to assemble and ensures easy mounting in even -15 degrees Celsius. Two minutes, and you are the first in line for take-off. The netting is tensioned using ratcheting buckles while also providing permanent tension.
Our anti-torque system is based on offsetting the arms in relation to the frame. This ensures that all forces are in line with the arms, creating a rigid assembly with no twisting that could result in bent swinging arms. The pilot can easily change the offset side to accommodate different engines.
We've worked hard to ensure ease of assembly and compact size when disassembled. The bottom sections and the leg can be divided into two parts in a couple of minutes. With Starseed Fusion you are ready for take-off in just a few minutes.
Starseed Fusion is made from the highest quality titanium and welded inside a vacuum chamber for optimal performance. Titanium is 40% lighter than steel, and is corrosion-resistant with anti-fatigue properties: no rust, no cracks, no peeling paint, so it'll always look great.
The Starseed Fusion is optimised for Vittorazi Atom 80, Vittorazi Moster 185 Plus and Vittorazi Moster 185 Factory R and hereby delivers by far the most integrated, compact and esthetically best setup available. Starseed Fusion does however support most other popular engines on the market.
Starseed X and Starseed XF are made in Norway with true love for sophisticated simplicity. Our little titanium starships bridge the gap between paragliding and paramotoring and providing the best possible mix of handling and weight shift capabilities without compromising stability. In short, a Starseed paramotor feels and acts like an extension of your own body, propels you right into the air with an incredible efficiency, and deliver the best flying experience to date, with the most futuristic design and a footprint light as air.
The Starseed Fusion air frame is made of an optimal mix of Titanium Grade 2 and Grade 5.
The harness is delivered standard with reserve container, pocket and speed bar pulley setup. Read more here.
Unlike free flying pod harnesses the Paramotor Pod has an opening both from the top and the bottom. It is stowed against the chest with a magnetic attachment during take-off and landing. Once in the air the pilot can pull it out and step into the pod from the bottom opening which is easy and intuitive. Read more here.
Starseed Fusion is currently available with engine adapter plates for the following engines:
9.5 liters soft bladder placed into a purpose-designed front container with manual pump and check valve to secure a fast transfer of fuel into the main fuel tank.
Our high quality padded frame bag is made out of Cordura 1000D and YKK zippers. The bag has four padded rooms; one for the struts and hoop sections, two rooms for a propeller up to 130 cm (2 part), and one room for tools. All walls are padded using a protective and unbreakable EPP foam material.
To purchase spare parts for your own personal Starseed Fusion, please contact our team manager at trond@flystarseed.com.
The Starseed Fusion printed manual with video links can be downloaded from here.
