Starseed XF

‍

Some of the summed-up features of the Starseed XF

• Closer to paragliding feel and dynamics than any airframe gives the pilot true confidence
  
• Optimised aerodynamics demands less thrust for the same lift
  
• Amazing weight shift capabilities
  
• No more bumps in your back while running due to the all new setup
  
• New optional super strong titanium swing arms for dynamic flying and acro
  
• All new Apco SLT Low MKII harness - with pivot makes landings even easier than ever before
  
• Front mounted 10 liters flexible fuel tank with high quality quick fuel line connectors - no more leaks, no need for venting and no more fuel odor
  
• Best possible in-built anti-torque system eliminates any felt torque, even on the stronger engines like Moster 185 Plus
  
• Optimized balance of materials makes it even lighter and stronger in the event of a hard landing
  
• In-built rectractable foot rest for even more effortless flying
  
• Super strong neodymium and very light magnet clamps ensure the tilt leg is always secured while flying
  
• Amongst the lightest, strongest and long lasting airframes on the market
  
• Mounting time below 4 minutes (without any stress)
  
• Available as a full conversion kit for existing Starseed X owners

Excellent flight characteristics

An all new standard for handling

Based on extensive testing over the last two years and many prototypes later, we have landed the perfect balance between the thrust line, the arm attachment points and the raiser attachments. This provides the best possible mix of handling and weight shift capabilities without compromising stability. In short, the synergy of all these factors is fantastic and delivers what we consider the best flying experience to date.

Sophisticated airframe design

On the Starseed XF the fuel tank is mounted as a 10-liters front fuel container, thus providing free flow of air around the pilot compared to traditional paramotor designs. This allows us to get more thrust out of every engine on the market - only with less noise and less fuel consumption. Even the smaller and lighter engines deliver remarkably better performance with the optimised aerodynamics found on Starseed XF.  

Talking about performance: The weight shift capabilities are way better than we could ever dream of, while still maintaining great stability. On Starseed XF you'll find the best possible balance between weight distribution, aerodynamics, weight shift capabilities and safety.

No more torque with our anti-torque system

Our anti-torque system is based on offsetting the arms in relation to the frame(not the raisers in relation to the arms). This way all forces are in line with the arms, creating a more rigid construction with no twisting that can result in the need for replacing the arms. The solution helps to compensate for and almost equalise the torque effect of the engine and propeller in a magnificent way. This system has proved to work even better than we could have had hoped for. The pilot can change sides according to which engine is fitted to the Starseed XF. 

We do not experience any torque steer with our sophisticated, yet very simplified, anti-torque system. Our system offers a stable flight yet retaining full weight shift capabilities. 

Out of this world design

Beautiful and thoughtful sophisticated simplistic design

The very heart of Starseed XF is the star that gathers and anchors both the gas tank and the struts and acts as a binding site throughout the design. The star is a significant improvement on how to assemble and tie up paramotors. The concept enables very easy assembly, reduces the amount of materials and provides a high strength with the fewest possible components. The struts are easily inserted into the star and locked with a simple locking pin mechanism that eliminates twisting, and hereby stiffens the whole frame.

Multi sectional frame hoop for easy dismantling and transport

Careful attention has been paid to the ease of assembly and the compact size when disassemble while remaining strong once assembled. The sophisticated design keeps the netting attached correctly aligned at all times. It is quick and above all easy to assemble - once built up, we find power launches are possible from the sturdy titanium hoop. The netting is tensioned using two m2 buckles, this allows a small amount of movement while also providing permanent tension and absorption of vibrations. Disassembled, the frames section makes a small curve that can be tucked beside the motor or stored in the optional padded frame bag.

‍

Front mounted fuel container with quick fuel connectors

Most paragliding and paramotor pilots are already used to having a front container when flying. Our custom purpose built front fuel container made out of Cordura holds 10 liters of fuel and with many features never before seen on such a container.

‍

Compact design for transport and storage

Designed for maximum portability, Starseed XF is particularly well suited for transport on aircrafts and for storage when the gear is not in use.

‍

Short assembly time

With Starseed XF you are ready for take-off in just a few minutes. Just take a look at Fabrizio Tieghi assembles the Starseed X in 3:55 minutes and disassembles in 1:53 minutes. Sorry for the bad video quality!

Smart parking

We have challenged the now 30 year old classic method of fixed foot /undercarriage with a brand new approaches. The ‘Tilt Leg’ is compact, functional and seamlessly integrated with the Starseed XF frame.

Tilt leg™

The ‘TiltLeg’ is compact, functional and seamlessly integrated with the Starseed XF frame. Should you want the lightest possible weight with 800 grams of savings, the ‘Tilt Leg’ can be easily dismantled.

An integrated (but removable) retractable foot ensures that the paramotor sits firmly on the ground when not in use. When preparing for take-off, the foot slides nicely away from the legs and unites with the rest of the frame using two ultra strong magnets inbuilt into plastic clips on the leg and the bottom sections of the frame.

Safety features

No more twisting of the arms under load

Our anti-torque system is based on offsetting the arms in relation to the frame (not the raisers in relation to the arms). This way, all forces are in line with the arms, creating a more rigid construction with no twisting that can result in the need for replacing the arms.

‍

Good distance to the hoop and propeller

The S-shaped top strut gives a good distance to thehoop and propeller gives a superior view of the wing over the head. You can easily tilt your head right up even with your helmet on.

‍

Other features 

Titanium

Starseed XF is based on the idea that "Light is right" – without compromising strength. The entire frame is made of the highest titan quality available and adapted to paramotoring for the optimal performance. Titanium is 40% lighter than steel, it is stronger than steel and alloys and it is corrosion-resistant with anti-fatigue properties. A titanium paramotor will look good for years to come: no rust, no cracks, no peeling paint, holding on to its good looks and its residual value.

‍

Harness

The new updated Apco SLT harness has the option of side mounted reserve chute, for ease of location and carrying your rescue chute. This can be attached left or right and replaces one of the pockets with a zip on rescue pod, so you always have your rescue chute, plus a clear lap for easy launching.

‍

Support for most engines

The Starseed XF airframe supports most engines on the market, and it is possible to custom-order engine plates for most engines on the market. Even with lesser parts and material than most other paramotor frames, this is made possible by the strong construction, intelligent distribution of materials and the binding method.

‍

Manual